Vibration Controllers – SCS-Controlsys

UCON Vibration Controller

Sound and Vibration

(By Econ Technologies)

UCON is a cutting-edge vibration controller for electro-dynamic and servo-hydraulic shakers. It integrates the up-to-date DSP technology, low noise hardware design, vibration control algorithms and data transmission protocols. UCON is also a multi-tasking system with close-loop control handled by a DSP processor and independent of PC to ensure the efficiency of real-time control systems, with rapid response to tested system changes. Thus it guarantees high performance, powerful features and safety. It also provides testing engineers an easy-to-use application software package.

Inputs
Analog Channels		Up to 16 synchronized channels for single chassis.
Resolution		24-bit ADC
Voltage Ranges		±10, ±1 or ±0.1 V_PEAK
Dynamic Range		110 dB
Coupling		AC, DC, ICP, TEDS(optional)
Maximum Input		± 36V_PEAKwithout damage
Filtering		An analog filter plus a 160 dB/ octave digital filter.
Amplitude Accuracy		0.08dB
Channel Match	Amplitude	within 0.01dB
	Phase	within ± 0.2 degree(DC to 20,000 Hz)
Signal-to-Noise		> 100 dB(DC to 1,000 Hz measured with half-full-scale sine wave)
Channel Crosstalk		< -110 dB
Outputs
Analog channels		1 Drive channel, 1 COLA channel. (optional)
Resolution		24-bit DAC
Voltage ranges		±10V_PEAK
Dynamic range		110 dB
Filtering		An analog filter plus a 160 dB/ octave digital filter
Harmonic distortion		<-100dB
PC Connection
Operating System		Windows 2000/XP/Vista
Connectivity		USB2.0
Regulatory Compliance
Compliance		CE Marking
Safety		EN 61326-1:1997, EN 61010-1:2001
General
Environmental	Temperature	41 to 113 ℉, -10 to 50℃
	Humidity	20% to 90% RH non-condensing
Electrical	AC Power	88 to 264 Volts, 47 to 63 Hz, auto sensing
	Consumption(W)	VT-9002: 40; VT-9008: 4.25; VT-9016: 4.98
Dimension (mm)	VT-9002	362x278x79	Weight(Kg)	2.77
	VT-9008	455x355x92		4.25
	VT-9016	455x355x92		4.98

Based on its powerful real-time control capability and large data transmission width, UCON features flexible and scalable vibration control solution from 2 to 16 channels.

VT-9002: up to 2 input (Voltage/ICP/Charge) channels and 1 drive channel

VT-9008: up to 8 input (Voltage/ICP/Charge) channels and 1 drive channel, 1 COLA channel, with 2 digital I/O interfaces.

VT-9016: up to 16 input (Voltage/ICP) channels and 1 drive channel, 1 COLA channel, with 2 digital I/O interfaces.

TEDS is optional for Type VT-9002, type VT-9008 and type VT-9016.

Available control applications include			Auxiliary applications (optional) include
1	Random	11	Profile Editor
2	Sine on Random (SoR)	12	Spectrum Analysis
3	Random on Random (RoR)	13	MATLAB Interface
4	Sine and Random on Random (SRoR)	14	Multi-layer Password Security System
5	Swept Sine	15	Automatic Drive Notching/Limiting Control
6	Resonance Search Track & Dwell (RSTD)	16	High Frequency Random Control (up to 18 kHz)
7	Classical Shock	17	High Frequency Sine Control (up to 10 kHz)
8	Shock Response Spectrum (SRS)	18	Low Frequency Sine Control (low to 0.01Hz)
9	Transient Time History (TTH)	19	Digital I/O interfaces
10	Long Time History for Road Simulation (LTH)	20	Multi-channel Control Strategies

UCON Vibration Controller VT-9002

UCON is a cutting-edge vibration controller for electro-dynamic and servo-hydraulic shakers. It integrates the up-to-date of DSP technology, low noise hardware design, vibration control algorithms and data transmission protocols. UCON is also a multi-tasking system with close- loop control handled by a DSP processor and independent of PC, to ensure the efficiency of real-time control system, with timely and rapid response to tested system changes. Thus it guarantees high performance, powerful features, and safety assurance. It also provides test engineers an easy-to-use application software package.